Products
Eccentric Reducer Rubber Expansion Joint
  • Eccentric Reducer Rubber Expansion JointEccentric Reducer Rubber Expansion Joint

Eccentric Reducer Rubber Expansion Joint

Dafugui manufactures Eccentric Reducer Rubber Expansion Joints (KPT Type) for connecting different pipe diameters in horizontal pipeline systems. Featuring an eccentric rubber sphere reinforced with nylon cord fabric and loose metal flanges, these flexible joints accommodate axial, lateral and angular displacement while helping reduce vibration. Available in DN40×25 to DN500×450 mm, with working pressure options from 0.25 to 2.5 MPa, rubber materials including NR, NBR, EPDM, CR and FKM, and flange options including Q235 carbon steel and 304/316L stainless steel.

    Eccentric Reducer Rubber Expansion Joint for Wholesale and Project Procurement

    Dafugui, as a source manufacturer, supplies Eccentric Reducer Rubber Expansion Joints and supports non-standard customization with in-stock delivery. Also known as eccentric reducing flexible rubber joint, both ends are offset from a common centerline, specifically designed for horizontal pipeline systems to connect pipes of different diameters. The product also provides displacement compensation and vibration damping, widely used in water supply & drainage, circulating water, HVAC, fire protection, chemical, petroleum and other horizontal pipeline systems.

    This KPT type reducing flexible rubber joint combines a reinforced rubber sphere with loose metal flanges. Its eccentric configuration is intended for horizontal pipe layouts where the relative position of the upper or lower pipe surfaces needs to be considered during installation.

    Dafugui Eccentric Reducer Rubber Expansion Joint
    KPT Type Reducing flexible rubber joint
    DN40×25–DN500×450 Nominal diameter range
    0.25–2.5 MPa Listed working pressure options
    NR / NBR / EPDM Available rubber materials, plus CR and FKM
    Q235 / 304 / 316L Listed flange material options
    GB/T 26121 Standard listed in product specifications

    Structure and Working Design

    The Eccentric Reducer Rubber Expansion Joint (also known as eccentric reducing flexible rubber joint or KPT type reducing soft joint) is a flexible pipeline connector specifically designed for connecting pipes of different diameters in horizontal pipelines. It consists of a rubber sphere body (inner rubber layer, nylon cord fabric reinforcement, outer rubber layer) combined with loose metal flanges. Both ends are offset from a common centerline, distinguishing it from concentric reducer joints.

    Reinforced Rubber Sphere and Flange Connection

    The rubber sphere uses an inner rubber layer, nylon cord fabric reinforcement and an outer rubber layer. This layered construction forms the flexible connecting section, while the loose metal flanges provide the flanged connection to the pipeline.

    The eccentric arrangement is the defining structural feature. Unlike a concentric reducing joint, the two ends do not share the same centerline, allowing the connection to be arranged according to the installation requirements of horizontal pipelines.

    Eccentric Reducer Rubber Expansion Joint structure and product description

    Displacement Compensation and Flexible Installation

    Multi-directional Compensation, Flexible Installation

    In addition to reducing connection, the Eccentric Reducer Rubber Expansion Joint also offers displacement compensation capability. It absorbs axial, lateral and angular displacements caused by thermal expansion/contraction, foundation settlement or installation errors. Not restricted by pipe misalignment or flange non-parallelism during installation, significantly reducing installation precision requirements for horizontal pipelines, saving time and cost.

    For pipeline designers and purchasing teams, the compensation requirement should be considered together with pipe diameter, operating pressure, temperature and installation conditions. The appropriate rubber compound and flange material should be confirmed against the actual service medium and project requirements.

    Eccentric Reducing Design for Horizontal Pipelines

    The core function of the Eccentric Reducer Rubber Expansion Joint is connecting different diameters in horizontal pipelines. Both ends are offset from a common centerline, specifically designed for horizontal pipeline systems. Installation allows either top-flush (preventing air pocket formation/cavitation) or bottom-flush (preventing sediment accumulation) alignment, flexibly adapting to different operating conditions. Compared with concentric reducers, the eccentric structure better conforms to the hydrodynamic characteristics of horizontal pipelines.

    For pump suction arrangements, buyers and installers should confirm the eccentric orientation before installation. Top-flush and bottom-flush arrangements serve different layout requirements and should be selected according to the conveyed medium and pipeline design.

    Typical Applications in Industrial Pipeline Systems

    Suitable for the following horizontal pipeline scenarios:

    Pump Inlet and Outlet

    Pump inlet/outlet — horizontal pump suction reducing connection, absorbing vibration and preventing cavitation.

    Water Supply and Drainage

    Horizontal water supply & drainage — transition connection between different pipe diameters.

    Circulating Water Systems

    Circulating water systems — cooling circulating water pipeline reducing.

    HVAC Installations

    HVAC systems — air conditioning machine room horizontal pipeline reducing connections.

    Chemical Processing

    Chemical material conveying — reducing connections in horizontal pipelines conveying chemical media.

    Fire Protection and Petroleum

    The product is also listed for fire protection and petroleum pipeline systems, subject to confirmation of the operating medium and service conditions.

    For other pipeline configurations, buyers can also review Dafugui's rubber joint product range to compare available flexible connection types.

    Technical Specifications and Material Options

    The following specifications are the listed product ranges for the KPT type eccentric reducing flexible rubber joint. Final selection should be confirmed against the required inlet and outlet diameters, operating pressure, temperature, conveyed medium and flange requirements.

    Parameter Specification Range
    Model KPT Type
    Nominal Diameter DN40×25 – DN500×450 mm (customizable)
    Working Pressure 0.25 MPa, 0.6 MPa, 1.0 MPa, 1.6 MPa, 2.5 MPa
    Operating Temperature -20℃ – +115℃ (FKM up to +250℃)
    Sphere Materials NR, NBR, EPDM, CR, FKM, etc.
    Flange Materials Carbon Steel Q235, Stainless Steel 304/316L, etc.
    Standard GB/T 26121
    Connection Type Flanged

    Frequently Asked Questions About Eccentric Reducer Rubber Expansion Joints

    Q1: Can eccentric reducer rubber joints be used at pump inlets?

    A: Yes, and this is the most common application. Using eccentric reducers in horizontal pump suction piping with top-flush installation effectively prevents air from entering the pump body and causing cavitation, protecting normal pump operation.

    Q2: What happens if the eccentric orientation is reversed?

    A: Reversed orientation causes air pockets (cavitation) at the top or sediment accumulation at the bottom, affecting media flow and potentially causing pump cavitation or pipeline blockage. Always confirm eccentric orientation before installation.

    Eccentric Reducer Rubber Expansion Joint installation and FAQ illustration

    Related Product Categories

    For buyers sourcing flexible pipeline connections, Dafugui also provides other rubber expansion joint solutions and products across its valve range. For product selection, project specifications or purchasing requirements, contact the team through the Contact Us page.

    Request a Quote for Eccentric Reducer Rubber Expansion Joints

    Send Dafugui your inlet and outlet pipe sizes, working pressure, operating temperature, conveyed medium, rubber material and flange requirements. Our team can review the required configuration and discuss customized specifications for your pipeline project.

    Send Inquiry
    Send Inquiry
    Contact Info
    Dafugui is a leading China manufacturer and supplier of flanges, valves, and pipe fittings since 2006. Welcome to our website! For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept